3 min readAerava

StormScope: a storm nowcast map for the next six hours

A nowcast answers a narrow question: what will the storms do in the next few hours? Here is what the StormScope map shows, how Aerava's standing watch uses it for your saved sites, and where it stops.

Illustration: a towering thunderstorm over flat farmland at dusk, lit from inside by lightning, with teal streamlines of wind curling into its base.

First published November 11, 2026 · Updated November 16, 2026

When storms are already on the radar, the question changes. You stop asking what the weather will be tomorrow. You ask where that line of storms will be in two hours, and whether it reaches your site. The answer to that short-range question is a storm nowcast. StormScope is the US storm nowcast map in Aerava, TempoQuest's platform for site forecasts. This article explains what a nowcast is, what the map shows, how Aerava uses it to watch your saved sites, and the limits Aerava states.

What a storm nowcast is, and how it differs from a model forecast

The US National Weather Service defines a nowcast as "a short-term weather forecast, generally out to six hours or less". It is about the next few hours, and about the weather that is already developing.

A numerical model forecast answers a wider question. It starts from a snapshot of the whole atmosphere and solves the equations of motion, heat and moisture forward in time on a grid. That lets it forecast storms that do not exist yet and look a day or more ahead. The price is time: a model run takes a while to compute, so it is never quite current when it arrives.

Operations teams use both.

  • The model forecast plans the day: where storms are likely, roughly when, and how strong.
  • The nowcast guides the next few hours: where the storms are heading and when they reach a given place.

That is true of any nowcast. Here is what StormScope itself shows, how often, and where it stops.

What StormScope shows, and how to open the map

StormScope uses technology from NVIDIA Earth-2.

Aerava describes StormScope in one sentence:

StormScope: the US storm nowcast on one map: radar reflectivity, cloud tops and lightning up to six hours ahead, with a new cycle every six hours.

Three things are on the map, each up to six hours ahead:

  • Radar reflectivity. Reflectivity is the strength of the echo a weather radar gets back from rain and hail. Its unit is dBZ. Higher values mean a stronger echo, which usually means heavier rain or hail.
  • Cloud tops. The upper edge of the clouds. Deep thunderstorms have high, cold tops, which is why forecasters watch them.
  • Lightning. Where lightning is forecast.

A new cycle is published every six hours, and the map covers the US.

Opening the StormScope map needs a free Aerava account. Creating that account does not start a trial and does not charge a card.

How Aerava's standing watch uses it

A map only helps while someone is looking at it. Aerava's standing watch does the looking for the sites you have saved. Every saved US site is re-checked every 15 minutes against the latest published StormScope cycle.

Aerava emails you when one of three things happens:

  • a site newly crosses its storm limit, which is 35 dBZ unless you set your own;
  • lightning is forecast at the site;
  • an active National Weather Service alert covers the site.

So an alert means something specific. At the latest check, the newest published cycle put your site over the limit you chose, or put lightning at it, or the National Weather Service had an alert in force there. The first two are forecasts, not observations. The storm may arrive earlier, later or not at all. Treat the email as a prompt to open the map, look at the timing and decide what to do with your equipment and your schedule.

The watch works on saved sites, and the number of sites you can save depends on your Aerava plan. See aerava.ai for the plans and current pricing.

The limits Aerava states

Aerava is direct about where StormScope and the watch stop. So are we.

  • Check freshness. Site checks use the latest published forecast; expired forecasts are marked. StormScope coverage and update times.
  • It is asset protection, never a safety verdict. Use it to protect equipment and schedule operations. Do not use it to decide whether people are safe. For that, follow official National Weather Service warnings and your own safety procedures.
  • The watch covers US sites. StormScope is a US nowcast, and the standing watch checks saved US sites.
  • It is for organizations. Aerava is sold to businesses and organizations, not to consumers.

Judge the nowcast against what you see at your own sites.

What to do next

Open the StormScope map with a free Aerava account, or read what Aerava does and what it costs.

Your forecast

Have a forecast question of your own?

Tell us the decision it has to serve. One short form reaches the team, and we review every request.