4 min readEnergy

Weather risk for energy and the grid: four questions to answer

Wind ramps, cloud over solar, temperature-driven load and storm restoration are four different forecasting problems. What each one needs, what TempoQuest offers, and roughly what it costs.

Illustration: a line of transmission towers crossing a dark plain toward a distant thunderstorm lit by lightning, with thin teal streamlines of wind near the ground.

First published November 11, 2026 · Updated November 16, 2026

Weather risk for energy and the grid comes down to four questions that an operations or trading desk answers every day. How hard will the wind blow at hub height? When will cloud cross the solar plant? How far will temperature push load? Where will storms put crews to work? This article takes them in turn, then sets out what TempoQuest offers for each and roughly what it costs.

The four questions

Hub-height wind and ramps

Turbines sit 80 to 160 m up, while standard weather stations measure wind at 10 m. Below a turbine's rated speed, the power in the wind rises with the cube of its speed. A forecast that is 10% high on wind is therefore about 33% high on available power (1.1 × 1.1 × 1.1 = 1.331). The costly events are ramps, when output climbs or collapses within an hour as a front or a storm's cold outflow crosses the farm, and cut-outs, when turbines shut down in very strong wind.

Cloud over solar

Cloud causes most of the short-term swings in solar output. The questions are local and about timing: when morning fog or low cloud clears, when a cloud band arrives, how fast output falls. A coarse grid blurs those edges.

Temperature and load

Heating and cooling drive demand, so peak load follows heat waves and cold snaps. Errors in the forecast high or low become errors in the load forecast, and they matter most on the peak days. Weather also limits the network itself: an overhead line can carry least current in hot, still air.

Storms and crews

Thunderstorm wind, lightning, ice and hail bring down lines, trip equipment and damage panels. Restoration is faster when crews and materials are in place before the storm, and that takes a forecast of where and when, not only whether.

What TempoQuest does about each

QuestionWhat TempoQuest offers
Hub-height wind and rampsAn Aerava wind forecast for a site, or your own AceCAST runs.
Cloud over solarYour own AceCAST runs at the resolution you choose.
Temperature and loadYour own AceCAST runs for the forecast, and Custom Weather Data for the history a load model learns from.
Storms and crewsAerava storm and hail forecasts, and its standing watch with email alerts.

Site forecasts on demand: Aerava

Aerava, formerly AceCAST Cloud, is the weather intelligence platform operated by TempoQuest. You pin a site and choose a forecast. Aerava runs a numerical weather model for that place and checks the result against the storm, wind and turbine cut-out limits you set. For US sites it offers:

  • Wind: a forecast at 1 km over a 400 km run, 6 to 24 hours ahead, with wind at up to 16 heights you choose, including hub height, and a turbine cut-out check.
  • Storms and hail: forecasts at 1 km over a 500 km square, up to 12 hours ahead.
  • Standing watch: every saved site is re-checked every 15 minutes. Aerava emails you when a site newly crosses its storm limit, when lightning is forecast at it, or when an active National Weather Service alert covers it.

Storm forecasts are not yet scored and hail-size output is experimental guidance. See how to score a forecast, including a bounded historical comparison with lidar observations. Site checks use the latest published forecast; expired forecasts are marked. StormScope coverage and update times.

Your own model on your own GPUs: AceCAST

Teams that run their own forecasts, on their own domain and schedule, can use AceCAST. It runs WRF, the Weather Research and Forecasting model maintained by NCAR, on NVIDIA GPUs, and it keeps the WRF workflow: WRF-compatible inputs, namelists and outputs, on Linux systems on premises or in the cloud.

See AceCAST 5, available now, for its physics, outputs and upgrade guidance.

History and planning data: Custom Weather Data

For planning studies, load models and AI training, TempoQuest scopes, generates, packages and delivers project-specific high-resolution model outputs and derived datasets. Typical requests are around 1 km or 3 km, at 15-minute, 30-minute, hourly or daily cadence, including historical datasets, delivered as NetCDF, GRIB, Zarr, CSV, JSON or through an API. See what AI weather training data needs.

Roughly what it costs

Aerava. Forecasts are priced in credits, and the price is shown before you run. There are monthly plans, credit packs and a 14-day free trial. See aerava.ai for current pricing.

AceCAST. Licensed by number of GPUs or metered by usage, with pricing on request. A trial runs for 14 days on one machine. You also pay for the GPUs: our WRF GPU vs CPU cost article works that sum from a published benchmark of earlier AceCAST releases.

Custom Weather Data is priced per project. The price follows the work: domain size, compute, history, cadence, validation and integration.

What to do next

See solutions for utilities, or price a forecast.

Your forecast

Have a forecast question of your own?

Tell us the decision it has to serve. One short form reaches the team, and we review every request.